Welcome to iSpace Signage.


Speak to a Consultant:
1800 729 133
  
Search


illuminated Sign & Signage / iSpace Signs

illuminated letters manufactured with layers and stainless steel applied to the faces.

The 25mm back sections are fabricated out of stainless steel. Then an acrylic set are placed inside the fabricated stainless steel set which have the led lights directly mounted into specially grooved sections of the acrylic.

 

The green acrylic in this example is 15mm thick and green led lighting was used to create this effect.

 

Finally another set of stainless steel letters was produced to sit onto top of the acrylic set to add another level of sophictication.

illuminated Signs are available in many types of forms.

The solid acrylic letters can have led lighting inserted into the way the sign is produced. Also known as embedded led signage.

 

The edges are slightly curved inwards also known as radius edges. The edges are professionally spray painted.Notice the back of the letters also have illumination as a feature. This is know as a double illumination feature.

 

It gives a full illumination to the face of the logo or lettering.

3 dimentional illuminated Signage applied to a gloss surface back panel.

These 30mm letters are produced with embedded led's into the lettering. They custom sprayed in a gloss or a matt finish on the sides. In effect this is type of sign is to illuminate from the front and have the sides in a blacked out manner.

There led lighting protrodes through the special acrylic to allow the faces to shine extremely bright.

The end result are illuminated letters with a rim-less edge type look. The logo with the letters well lit up.

illuminated letters fabricated out of metal and placed on metal poles.

The air floating style lettering is a very specilised production method.Custom produced so the logo is perfectly aligned according to the specifications.The edges are sprayed in a gloss or a matt finish. In effect this is type of sign is to illuminate from the front and have the sides in a contrasting colour.

 

Almost apprearing as is they floating in a brilliant manner.

 

It gives a very 3 dimensional impression of the logo. It's regarded as a very upmarket way of going about the project.

illumination on a full surface of the letter face and subtle rear illumination.

These 30mm letters are custom spray painted on the letetr edges which are also reffered to as the returns.

 

The led lighting extends all the way to the edge of the letter faces. This photo clearly shows a close up of the final product.

 

A second rear back thin illumination shines on the back to enhance the letter style.

Solid 15mm illuminated faces set into perfectly fabricated metal edges.

These 30mm metal fabricated letters have a brushed finish if you look closely. These are actually aged bronze in colour.

 

The acrylic face set are perfectly aligned with the metal set to form one complete unit.

 

The led lighting is set inside the metal letter to allow the faces to illuminate.

illumination on the rear back side with metal fabricated letters on the front perfectly spray painted in a matt paint finish.

The 50mm letters were custom made for CHANEL sprayed in a matt finish. In effect this is type of sign is to illuminate the back half of the letters by embedding led modules into the metal face units.

 

A brilliant result of how letters can be produced.

 

This letter type is regarded as the ultimate upmarket way of going about illuminating signage letters. We belive strongly that we have a competitive advantage over any other compnay in Australia with the quality of metal fabrication we produce. Simply Brilliant.

illuminated letters mounted by welding a structure to align the letters as if they floating in the space.

The 50mm letters custom sprayed in a gloss or a matt finish. In effect this is type of sign is to illuminate from the front and have the sides in a contrasting colour.

 

Almost apprearing as is they floating in a brilliant manner.

 

It gives a very 3 dimensional impresion of the logo. It's regarded as a very upmarket way of going about the project.

illuminated letters which appear as push through style lettering.

The depth of the push through style letters can differ depending on the result you looking to achieve. The size of the letters plays a part in sellecting how thick the raised letters should be.

 

We often use 6mm , or 10mm , 15mm, 20mm

 

The backround does not illuminate, just the letters and logo shapes.

 

It gives a very 3 dimensional impresion of the logo when it's illuminated and is regarded as an upmeket way to produce an illuminated sign.

illuminated letters with fabricated stainles steel with a rim lip style.

The 80mm custom fabricated stainless steel letters have a brushed effect to the stainless steel which is matt in effect. Notice the stainless steel boarder which surrounds the faces of the letters.

 

The led lighting modules are placed inside the stainless steel letters.

It gives a very 3 dimensional impresion of the logo. It's regarded as a very upmarket way of going about the project.

illuminated letters ceiling mounted with illumination to the face on both sides.

These 100mm letters custom mirror polished stainless steel fabrciated letters are designed to be mounted by rods to the ceiling mount unit.

 

Almost apprearing as is they floating in a brilliant manner.

 

The illumination aspect extends all the way to the faces of the letter edges. These letters have a double sided illumination feature.

illuminated letters in Fabricated Brass Letters with opal white faces.

The 100mm letters custom illuminated fabricated letters have a thin boarder in gold metal with the faces of the letters set back just 1mm from the egeds of the faces.

 

This type of lettering is regarded as very sophisticated type of upmarket type of lettering style.

 

These are extremely unique type of fabricated letter which not many compnaies have the capabilities of manufacturing.

Solid Acrylic lettering with led lighting set into the acrylic in an embedded manufacturing method.

The 30mm letters have custom spray painted sides to the letters and are produced where the illumination is projected through the face as seen in yellow. However they also have a back style of illumination too.

 

They set off the wall slightly by pin type fixings so the lettersa are floating.

 

We can achieve very detailed sections of the logo in this type of illumination method.

Fabricated Letters showing the inside of the letters in detail.

As you can clearly see in the photo the inside of the letters are painted white. The reason this done is white paint acts as a reflective surface for the white led lighting to bounce off and enhance the illumination.

 

The led modules are placed in an even manner all across the back of the letters.

 

The led's come lined with double sided tape but still need to be silicone stuck down for long term so they don't lift.

Full Perspex Illuminated letters with internal led lighting.

The faces of the letters are first laser cut and then the sides are molded with heat and bent into shape by hand.

 

These letters are made from full perspex. The faces have black vinyl applied to the outside of the perspex in this example.

 

It gives a very 3 dimensional impresion of the logo with led lighting places inside the letters.

Molding Shells for illuminated letters in massive quantities

When producing thousands of the identical size letters we mold the letter shell out of a polycarbinate plastic.

 

The inserted led back panels have very small led modules inserted into the backing panel.

 

The faces clip into the letter casings, they designed to allow for this feature.

illuminatied letters on a full illumination surface.

The 35mm letters custom sprayed in a gloss or a matt finish. In effect this is type of sign is to illuminate from the front and have the sides in a contrasting colour.

 

Almost apprearing as is they floating in a brilliant manner.

 

It gives a very 3 dimensional impresion of the logo. It's regarded as a very upmarket way of going about the project.

Custom Spray painted lluminated letters with internal led modules

The 90mm letters custom sprayed in a gloss red paint. finish. We can colour match any pms colour for the 2 pack automotive spray paint.

 

These are extremely long lasting type of permament type of letter fabriction often designed to go on the outside of a building.

 

As can be seen in the photo we ensuring the led's long term are bonded to the back of the letters so there's no movement.

Perfectly Fabricated Stainless Steel Letters with brushed linished finish incorporating illumiated front faces.

The 90mm letters custom metal stainless steel letters have been fabricated to absolute perfection. The led lighting is inside the letters.

 

The Sign has been designed so the letters are placed on a very neat back section made out of stainless steel which hides the wiring aspects and allows the logo to appear as if it's floating in space.

 

This type of lettering is increasing popular in upmarket shopping centres seen globally as a trent in signage.

Full white crisp perspex fabricated illuminated letters.

These are 100mm thick letters custom fabricated out of perspex. The wiring is done inside the bulkhead back round surface.

 

They are made by hand so have a fair amount of labour involved in the manufacturing process.

 

In order to access inside the letters they have small screws mounted to the pvc backs of the letters as can be seen in the photo.

Welding phase of producing Fabricated metal letters.

First the letters are custom laser cut to perfection. The sides of the letters are then bent with special metal bending mahines which notch the metal on the exact specific area's where they would follow the contours of the letter shapes.

 

They are machine welded with notches to fasten the 2 metal surfaces together.

 

Once this phase is complete they get welded by hand to ensure the joins are perfectly spot welded with no gaps before they go into the metal finishing phase of production.

Top mounted style of illuminated Signage Letters.

Custom made out of stainless steel fabrication the letetr faces extend all the way to the edge of the letters. illuminate from the front with internal led lighting.

 

Almost apprearing as is they floating in a brilliant manner.

 

Ceiling mounted signage options is becoming increasingly popular.

illuminatied Solid Acrylic letters

The back panel is routered out to allow for the 3d solid lettrs to fit into the cut out spaces. These are also known as intracut lettering.

 

The solid letters are stuck to a sheet of opal 3mm prespex which gets mounted to the inside of the backside of the face panel.

 

The lighting is by led modules which sit inside the box formation.

illuminated faces with the returns of the letters painted out black.

These 20mm shapes have small led strip lighting embedded into the acrylc backs. the sides are custom sprayed in a gloss or a matt finish.

 

In effect this is type of sign is to illuminate from the front and have the sides in a contrasting colour.

 

The illuminated objects are floating off the surface to creatd a very dynamic type of display.

illuminatied letters on a full illumination surface.

The 20mm letters custom sprayed in a gloss or a matt finish. In effect this is type of sign is to illuminate from the front and have the sides in a contrasting colour.

 

Almost apprearing as is they floating in a brilliant manner.

 

It gives a very 3 dimensional impresion of the logo. It's regarded as a very upmarket way of going about the project.

Custom Bronze Fabricated Letters with internal illumination.

The letters are custom made in bronze with a brushed finish.These are regarded as exceptional upmarket type creations.

 

They are only for companies with large signage budgets to get a first class result.

 

The lighting conponent is all internal. These letters have a boarder type stroke on purpose in this photo.

illuminated Letters fabricated out of full acrylic with translucent vinyl covering the the faces and sides.

The 100mm thick letters custom led lit illuminated letters have translucent blue vinyl applied to teh sides and faces to create an entire blue glow letter style.

 

Attached to the back panel surface with the wiring all hidden away neatly.

 

Designed to be a very permanent outdoor sign which will last a very long time.

Bronze Fabricated letters with the back half of the letters illuminated.

This style of lettering is very expensive and upmarket for the superior brands of the world.

 

The brushed linished effect was applied to the metal before the chemical bronze effect was applied.

 

The back opal white acrylic set fits perfectly into the metal set to form one unit.

LED modules applied to the PVC backing letter inserts.

The photo shows the back sections only of the led lights stuck onto the letter backs. These are then inserted into the metal sections.

 

We use a very high grade of led module with mainly a 5 year life span at least.

 

The led lighting is then connected to a led transformer to power of the sign lettering.

Opal white illuminated faces fabricate to the edge of the letter.

This photo is showing the faces of the letters in white extending to the letter edge so the logo is very crisply manufactured to display exactly as it's been designed with no visual modifications.

 

The lighting sites into the letters and the letter returns are spray painted perfectly.

 

The wiring between the letters is hidden in the back panel surface.

Full illuminated letters in production phase.

We have the capacity to produce a massive quantity of this type of lettering style. They are fabricated by hand so they take some time to make. We fabricated perspec letters to the highest of standards in Australia.

 

We can produce these letters to very large sizes.

 

Larger more established type retailers often use these as an outdoor type of signage product for a long term application.

Halo Lighting illuminated Letters.

Custom spray painted in a gloss or a matt finish. In effect this type of signage letter has led lighting inside the metal fabricated units which projects the lighting into the backround surface.

 

Almost apprearing as is they floating in a brilliant manner with the letters floating fixed to the surface with pins.

 

We are experts in producing all types of letters with illumination.

Routed acrylic letter shapes with embedded led's into the backs of the logo shapes.

Led strip lighting has evolved alot over the past 3 years and has become an increasingly popular method of creating illuminated signs.

 

The lighting inside is placed very closely together to ensure a perfectly even illumination to the face of the letters.

 

The led's strip lights are soldered together to form a wire point at the back of the letter.

Brilliant illuminated Signage for Rolex

Multi layered signage to create a very upmaket style of illuminated signage. So it looks very appealing to the day and night time viewers.

 

Stainless Steel flas solid cut out letters was used to further enhance the sign creation.

 

Solid green and yellwo perspex was incorporated into metal stainless steel housings to create somthing truely fantastic.

illuminated letters with blue translucent faces.

Sometimes brands want the foreground face of the letter to be the focal point of the creation.

 

Led lighting sits inside the fabricated letters

 

It gives a very 3 dimensional impresion of the logo. The wiring is hidden away inside the back frame.

A close up showing the led modules

These high-power single-color LED light modules provide consistent illumination for channel letters.Each LED module has 3 enhanced Epistar LEDs with an output of high lumens.

 

LEDs emit an extra-wide 160° beam angle that is best suited for illuminating up to 28" wide channel letters that are as shallow as 3 inches.

 

Double-sided 3M adhesive foam tape is also included for secure mounting. The UL-Recognized, weatherproof module has 12V DC operation and is designed to last 50,000 hours. Available in cool white, blue, green, and red.

illuminatied letters on a full illumination surface.

The 3D Illuminated Acrylic Embedded Lettering is generally 25mm thick opal acrylic letters or graphic image with LED modules to illuminate signage at night.

 

The letter shape is cut on a computer-controlled router, as well as a trench in the back of the letter for installing the LED (light-emitting diode) modules and wiring.

 

Additional decoration can be added to the letter to enhance your unique brand, message, emotive state, environment by layering, painting, applying translucent SAV, digital print or metal finishes etc.

 

Options for embedded lettering include; Halo Illumination, Face Illumination, Side Illumination and Full Illumination.

Beginning phase of creating illuminated fabricated lettering.

3D Fabricated letters give the appearance of a 3-dimensional image; typically used to give the letters extra visual appeal, the letter face and back are typically cut on a computer-controlled router.

 

This creates the basis for the letter shape. The sides of the fabricated letter, called the returns, are then formed by bending a 25mm to 200mmH wide return. The return is welded in place to the letter face to create a solid channel in the shape of the letter.

 

3D illuminated stainless steel lettering can be fitted with various types of lighting components to illuminate the letters; neon, light-emitting diode (LED) modules or fluorescent tubes.

Fabricated Metal Signage

The Metal is the supreme material when it comes to fabricated outdoor signage but also widely used as internal signage.

 

Strong and durable it can be folded, rolled cut and welded by an experienced signage manufacturer into almost any shape.

 

We have the strongest metal fabrication ability in Australia with years of experience in metal sign fabrication.

 

We fabricate letters in aluminium, copper, bronze, brass, stainless steel and chromed steel plate lettering and signs.